g.BSamp

Products < Data acquisition < Systems <

Stand-alone Biosignal Amplifier System

The g.tec biosignal amplifier is a basic signal-conditioning element to establish biosignal data acquisition and realtime analysis from MATLAB and SIMULINK. Its user-selectable multi-channel modules allow the simultaneous recording of EEG, EMG, EOG and ECG. The stand-alone amplifier system can be equipped with 8 or 16 channels or it can be stacked to have a 32–, 48–, or 64–channel system. The modules are designed with bipolar inputs in order to perform not only referenced recordings, but also true bipolar recordings and analyses.

Filter, sensitivity and notch settings are user–selectable and due to its battery supply g.BSamp is fully portable. You can combine the g.BSamp with the g.EEGcap & the g.GAMMAcap and there is a huge range of possible electrodes.

g.BSamp represents the optimal equipment for research in the field: from cars to aeroplanes and/or in vivo trainings as well as from research to rehabilitation. It has an operation time of 8–10 hours with the battery supplied so that even time consuming trainings or long field investigations are warranted. For use in the lab a medical mains receiver is available.

Standard settings: LP: 100 Hz/1kHz; HP: 0.5/2 Hz; Sensitivity: 500 uV/5mV; 50 Hz notch

Highlights

2 channel amplifier module
multi-modal amplifier system (EEG, EMG, EOG & ECG)
8 and 16 bipolar/unipolar channels
user selectable filter and sensitivity settings via robust DIP switches
portable due to battery supply
compatible with many other user-specific systems
can be combined with g.Recorder for EEG, EMG, EOG and ECG data acquisition
CE certified medical device for use in humans according to medical normative EN 60601-1 (IEC 60601-

Classification

Safety class II
Type of applied part BF
Protection against mechanical distortion and liquids IP22
Operation mode S1 (permanent operation)
Conformity class IIa

Important Information

g.BSamp must not be used for patient monitoring or determination of brain death

Design the amplifier exactly for your needs

Select the number of channels and define which kind of signal (EEG/ ECG/ EOG/ EMG/ respiration/ acceleration/...) you want to measure.

Measure biosignals reliably even outside your lab

Gain high quality results under difficult conditions through bipolar recordings and battery supply.

Accessories

electrodes
g.EEGcap & g.GAMMAcap
g.ECG box
g.ACCUpack - battery supply for the amplifier

Downloads (for further information)

Technical Specifications (PDF 11 kByte)
g.BSamp Folder (PDF 561 kByte)

Site map | Disclaimer