TU-UT-TEUSBO

Description

Two Channel USB Oscilloscope with Software.
– timebase: 20ns to 100ms per division
– trigger source: CH1, CH2, EXT or free run
– trigger edge: rising or falling
– trigger level: full-screen adjustable
– step interpolation: linear or smoothed
– markers for: voltage and frequency
– input range : 5mV to 2V/division
– input sensitivity: 0.15mV display resolution
– auto set-up function and X10 option
– pre-trigger function
– readouts: True RMS, dBV, dBm, p to p, Duty cycle, Frequency…
– recording length: 4K samples / channel
– real time sampling frequency: 1.25kHz to 50MHz
– sampling frequency for Repetitive signals: 1GHz

Includes spectrum analyzer:
– frequency range: 0…1.2kHz to 25MHz
– linear or logarithmic time scale
– operating principle: FFT (Fast Fourier Transform)
– FFT resolution: 2048 lines
– FFT input channel: CH1 or CH2
– zoom function
– markers for amplitude and frequency
– transient recorder:
– time scale: 20ms/div to 2000s/div
– max. recording time: 9.4hours/screen
– automatic data storage
– automatic recording for more than 1 year
– max. number of samples: 100/s
– min. number of samples: 1 sample / 20s
– markers for time and amplitude
– recording and display of screensrecording and display of screens

Specifications:
– inputs: 2 channels, 1 external trigger input
– input impedance: 1Mohm // 30pF
– bandwidth: DC to 60 MHz ±3dB
– max. input voltage: 30V (AC + DC)
– input coupling: DC, AC and GND
– Supply from USB port (500mA)
– dimensions: 8.2 x 2.2 x 7 inch

Minimum system requirements:
– Windows PC
– needs Win98SE or higher*
– SVGA display card (min. 800×600, 1024×768 recommended)
– mouse
– USB port 1.1 or 2.0 compatible

Includes:
– USB PC oscilloscope
– 2 x 60MHz scope probe (PROBE60S)
– USB cable
– Software downloadable at https://www.vellemanusa.com/support/downloads/?code=PCSU1000
– getting started manual