Looking for a calibrated audio solution for 3T and 7T fMRI? We are proud to introduce BOLDfonic, an integrated, single-source solution for calibrated audio. BOLDfonic delivers high-fidelity acoustic stimuli for fMRI while also attenuating scanner noise.
Our electro-dynamic driver technology uses the magnetic field of the MRI scanner to drive the headphone membranes. This results in powerful speakers with an excellent frequency response across a wide dynamic range. A novel USB sound processor with automated synchronous triggering capabilities and a fully–loaded amplifier system provide all the controls you need for rigorous multimodal EEG/fMRI studies.
BOLDfonic integrates perfectly with our LCD monitor system, eye tracker and the other Made for fMRI devices from our range.
Hear the Difference
You wouldn’t listen to the music on your iPhone with a stethoscope connected to its speaker…. Yet, most MRI-compatible headphones offer just that; audio piped to the participant down long, acoustic tubes. The result? Awful sound quality with restricted frequency response and restricted utility in research.
BOLDfonic includes everything you need for high-quality audio delivery in the MR:
A pair of electro-dynamic headphones. Various options are available to suit different types and sizes of headcoils.
A set of earphones to accommodate even the the tightest of headcoils
Fully–loaded amplifier system which provides all the controls you need for rigorous multimodal EEG/fMRI studies. Supports multiple signal sources and can drive two sets of headphones in parallel.
AudioFile USB sound processor with automated synchronous triggering capabilities
Desktop microphone for communication from the technologist. Ask us about our optional bi-directional communication feature which use the noise-cancelling Optoacoustics FORM-III participant microphone. Compact monitor speakers are included too, so you can always hear the same audio as your participant.
Better Audio Quality
BOLDfonic headphones utilize moving-coil transducers positioned in the headphone body, just like hi-fi headphones! As you can see illustrated in Figure 1, this results in excellent frequency response across a wide dynamic range.
Though standard moving-coil transducers utilizing a magnet aren’t safe in an MRI room, the BOLDfonic headphone system features a unique electro-dynamic driver that utilizes the magnetic field of the MRI scanner to drive the headphone membrane. An additional piezoelectric driver can be fitted to some headphones, which enables them to be used outside the bore as well.
Reduced Gradient Noise
When compared to a standard scanner audio system, the circumaural, closed-back BOLDfonic headphones offer improved acoustic isolation from the gradient-noise of the MRI scanner. Acoustic attenuation is increased by at least 15dB over most of the audible range, as illustrated in Figure 2.
Where space permits, soft memory foam cushions can also be inserted between the head and contact points of the coil to provide even better isolation, reduce bone conduction and improve participant comfort.Figure 2. Attenuation characteristics of BOLDfonic system headphones compared with standard acoustic audio system.
Easy to install
BOLDfonic headphones connect through the RF penetration panel using a pair of BNC bulkhead connectors. Two independent stereo channels maintain the high channel separation of the amplifiers. The filter/transformer set blocks DC levels, separates the ground of the RF cage from the ground of the audio system, and reduces unwanted RF-signals by about 85dB. Extra filters inside the scanner room reduce RF signals even further by about 90dB.
A range of headphones to suit any MRI system
The circumaural, closed-back headphone is available in a number of sizes and cable routing arrangements to suit different headcoil designs (please refer to the table below). It offers superior gradient noise dampening compared to simple pneumatic, air tube solutions. Where space permits, soft, memory foam cushions can also be inserted between the head and contact points of the coil to provide even better isolation, reduce bone conduction and improve patient comfort.
A unique electro-dynamic driver uses the magnetic field of the MRI scanner to drive the headphone membrane. This results in powerful speakers with an excellent frequency response across a wide range. An additional piezoelectric driver can be fitted to some designs, which enables those headphones to be used outside the bore too.
A design for any headcoil
Headphones are available in a number of sizes and cable routing arrangements to suit different headcoil designs.
When there is insufficient space for headphones, an earbud-style earphone option can be used. This simple and effective solution places the headphone driver unit just outside the coil, and delivers the audio to the ear via a very short airtube and passive earbud, maintaining the best possible sound quality.
HP SI 01
Standard headphone with excellent passive gradient noise dampening and powerful electrodynamic speaker system.
32mm thick. Dimensions: outer 85x105mm, inner 45x65mm.
Available for Philips and GE scanners. Compatible with 8 and 12 channel head coils.
HP SC 01
Special version of HP SI 01 with additional compensation element optimized for use with Siemens scanners.
For Siemens scanners and larger volume head coils (i.e. not 32/64 channel).
HP SC 02
Same features as HP SC 01, but 6mm slimmer and with special foam cushion set.
Compatible with Siemens 8 and 12 channel head coils.
HP SIE 01
Special version of HP SI 01 with additional piezo drivers. Can be used inside or outside the scanner.
Available for Philips and GE scanners.
HP VS 01
Smaller version of HP SI 01.
Optimised for Philips and GE 32-channel head coils. Also for use with 8 channel head coil and thick foam cushion.
HP VS 02
Very small version of HP SI 01 with tilted cable management.
Optimised for Philips and GE head & neck coils.
HP PI US
Ultra small on-ear piezo headphone for use in modern multi-channel head coils with a diameter down to 190mm. Also consider alternate HP AT 01 insert earphone (earbub) design.
Dimensions: outer 80x105mm, inner 45x70mm.
Works with any head coil. Works inside and outside the scanner.
HP M 01
Same electrodynamic driver system as of HP SI 01 or HP SC 01. Small headphones, optimized for use with children and NHP. Special version for pure passive dampening or matched, non MRI-compatible (MR Unsafe) headphones are available.
Dimensions: outer 60mm, inner 25mm.
Available for Siemens, Philips and GE scanners.
Earphones are the solution when space within the coil is limited
Some headcoils allow insufficient space to accommodate circumaural headphones. BOLDfonic earphones are a simple and elegant solution which places the headphone driver unit just outside the headcoil, and delivers the audio to the ear via a short airtube and passive earbud.
Electro-dynamic earphone drivers
The drivers use the same proven electrodynamic system technology as the standard BOLDfonic headphone. They’re safe to place within the bore or headcoil, so you can position them wherever is convenient. Ideally they should be reasonably close to to the ear, in order to keep the airtube length short. The drivers are connected to the control box either via the RF filter panel.
The airtube can be detached from the driver, so that the ear plugs can be inserted conveniently while outside the bore. Various lengths of airtube are available, depending on where you choose to place to drivers.
The sound pressure level at the driver is over 130dB, and decreases as the airtube length increases.
The frequency response is also a function of the tube length, for example 40Hz-12kHz for a 30cm tube or 40Hz-5kHz for an 80cm tube.
Various types of earplug are available.
Passive ear defenders
Passive ear defenders can be placed over the ears to reduce scanner noise. The ear defenders squash down well, taking up relatively little space.
Amplify your options
BOLDfonic stereo amplifiers are perfectly matched to the filter set and headphones; the design features multiple digital optical inputs to connect different signal sources. They are easy to operate for routine use, yet still offer sufficient flexibility and control of auditory stimuli for fMRI. The amplifier’s comprehensive design can drive two headphones, external speakers, and supports an optional noise-cancelling microphone for the participant. It even has a digital I/O interface to support direct integration with the MRI scanner.
Number of digital optical inputs
Number of digital optical outputs
Number of headphone outputs
2 stereo pairs
Channel separation (@ full load)
Loudspeaker channels (stimulus & subject monitor)
Number of mixable channels
Built-in frequency generators
Built-in noise generators
-120 – +30dB
Absolute SPL monitoring
A compact desktop microphone sited in the console room can be combined with an optional noise-cancelling microphone mounted on the headcoil; this setup provides clear, simultaneous, bi-directional communication between the technologist and participant.
Synchronous auditory stimuli
Combining local solid-state storage of audio samples with an intelligent USB interface, the AudioFile sound processor makes it simple to synchronously and precisely mark the onset of an audio stream, with all the control you need for rigorous multimodal EEG/fMRI studies. The processor can be used in USB Audio mode, just like a standard USB soundcard, so that you can play any audio source available on the stimulus delivery computer, or as an independent playback device, which allows you to select and play WAV samples stored on the integrated AudioFile SD card.
BOLDfonic fMRI audio (6)
Will you be able to modify/drill my penetration panel to allow for the two BNC connectors to mount during installation of the equipment?
No. We are not equipped to perform this as it requires facilities approval. You should consult the manufacturer of the penetration panel as well as your facilities department for proper guidance.
Typically it is not suggested to run the cabling overhead towards the MR scanner as there is potential of coupling with the RF cables of the scanner. If the aim is to reduce stray cabling along the floor it is suggested that the headphones are stored/hung with excess fiber cabling “looped” as to keep it out of the way.
I noticed that the standard setup does not include a patient microphone; is there one available for bi-directional communication?
Yes! While not included as standard there is an option for an Optoaccoustics patient microphone available in both basic and noise canceling models. Please request pricing if interested!
Yes! There are headphones that span the full range of infants through adults. Additionally there are insert (air-tube) earphones that can be used for all ages, and for all headcoils.
Shielded BNC cables are routed through a filter box/transformer. The supplied BNC connectors will need to be mounted within your penetration panel, this will require two 11mm holes for this purpose, the supplied RF filters will be connected on the MR side with 9 meters of cabling to connect to the headphones. Typically cables run from the penetration panel located between the control room and scan room, however extending the BNC cabling may also be possible to route it from the equipment room.
The BOLDfonic system is comprised of the MR Confon main console, an operator microphone, a set of patient/participant insert earphones, control room monitoring speakers, along with all audio cables, connectors, and filters necessary for full installation — just supply the audio output from your PC or alternative source via a ⅛ in. audio cable or SPDIF output. Keep in mind that the BOLDfonic system includes the AudioFile unit which can function as an external USB audio card.
Showing 1–16 of 20 results
Harmony MRI-compatible patient entertainment
FOMRI-III – Fiber optic microphone to capture speech in MRI
FOMRI-I by Opto-Acoustics: Fiber-optic microphone for use in MRI
MR Confon Starter f MKII system (inc. one headphone)
MR Confon easy04 system (inc. one headphone set)
MR Confon – Small headphone headset and cushion set
HP piezoelectric headphones for all head coils
HP VS headphones for Philips/GE 32 channel head coils
HP headphones for Siemens 8 & 12 channel head coils
HP headphones for Philips/GE 8 & 12 channel head coils
HP VS headphones for Philips/GE 32 channel head coils
HP headphones for Siemens 20 channel head coils
MR Confon headphones for GE, Philips, Siemens
MR Confon – HP AT01 insert earphones
HP headphones for Philips/GE 8 & 12 channel head coils