SD-MS-TUTRM

Description

TRIGGY: 8 Channel Physical To Digital Trigger Device. 8 multipurpose analog/digital trigger inputs for audio, photocell, pressure, 8-bit trigger PLUS a built-in 8 channel DAQ with oscilloscope functionality for bench testing.

TRIGGY is a complete solution for deriving precise TTL triggers from physical stimuli and responses. Operate in real-time mode to extract and send real-time TTL trigger events based on timing of physical events.

~and~

TRIGGY is a complete solution for precise bench testing of computerized experimental paradigms, including built-in oscilloscope and sensors. Operate in bench testing mode to compare the timing of physical stimuli vs TTL triggers sent by a computer, TTL triggers sent by a computer vs TTL triggers sent by TRIGGY, or TTL response codes sent by a computer vs TTL response codes sent by TRIGGY (based on pressure sensor signal).

TRIGGY includes:
– Eight multipurpose trigger channels accepting audio, photocell, pressure, and an eight-bit TTL trigger input.
– Integrated USB oscilloscope with TracerDAQ software
– Base sensor package: 1 x 3.5 mm male-to-male mono audio cable, 1 x photocell, 1 x pressure sensor, 8-bit trigger input with 37 pin input connector

Optional accessories (sold separately):
– Additional Triggy audio cable
– Additional Triggy photocell
– Additional Triggy pressure sensor
– Remote input box with 25 ft cable for audio or photocell signals
– Triggy microphone for measuring ambient audio (requires two of the 8 trigger inputs — one to source power)
– Triggy four-button response device with 25 ft cable to connect via front panel input for channels 5-8

Oscilloscope Specifications: 8 channel DAQ with Analog Inputs, Digital I/Os and Counter with 100 kHz Sampling Rat. The unit supports up to (8) Single-Ended Analog Inputs, (8) Digital I/Os and (1) 32-Bit Counter Input. It has an aggregate sampling rate up to 100 kS/s (1 Channel = 100 kS/s; 2 Channels = 50 kS/s Each), input voltage range of -10V to 10V ]with 1 MΩ Input Impedance. It is powered by 5 Volt USB supply from your PC. No External AC power is required. There is an LED indicator for Status (On or Off) and Activity (Blinking). Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download.